New Construction in Studio City, CA
New construction in Studio City means building a home from the ground up — on a vacant lot, an infill parcel, or a teardown-and-rebuild — rather than remodeling an existing structure. As of August 2026 the typical Studio City home sells for about $1.89 million and the median new-construction listing runs near $2 million, so a well-built home in the 91604 area is both a place to live and a serious asset. HomeSense Construction & Remodeling is a licensed California general contractor and home builder (CA Lic #1125001) that has built and rebuilt homes across the San Fernando Valley since 2011.
Last updated: August 2026.
What does new home construction in Studio City involve?
Studio City is really several markets in one. There are flat single-family lots on the streets north and south of Ventura Boulevard, mid-century homes ready for a modern rebuild, condominium and townhome pockets near the commercial corridor, and hillside parcels climbing toward Mulholland and the canyons. Each lot type changes how a new home is engineered: a ground-up custom home on a flat Colfax Meadows lot follows a different track than a knockdown-rebuild on a sloped parcel above Ventura. HomeSense handles the full path — feasibility and lot analysis, architectural and structural design, LADBS permitting, site work, framing, systems, and finish-out — with one licensed team from raw dirt to final inspection.
How much does it cost to build a new home in Studio City?
Los Angeles custom construction in 2026 generally runs $400 to $750 per square foot: builder-grade spec homes near $300–$400, mid-range custom at $500–$750, and luxury finishes reaching $850–$1,500 per square foot. Studio City’s hillside lots carry a premium — sloped and canyon sites frequently run $1,000 to $1,800+ per square foot once geotechnical work, retaining walls, and deep foundations are priced in. Two neighboring lots, one flat and one steep, can differ by about $150 per square foot before a single design choice is made.
| Build tier | Typical 2026 cost per sq ft (LA) |
|---|---|
| Spec / builder-grade | $300–$400 |
| Mid-range custom | $500–$750 |
| Luxury custom (flat lot) | $850–$1,100 |
| Hillside / canyon custom | $1,000–$1,800+ |
These are construction figures only; land, design fees, and LADBS permit and plan-check fees are separate. On a large Studio City build, plan-check and permit fees alone can range from a few thousand dollars to $100,000 or more depending on the valuation LADBS assigns. Our Los Angeles remodeling cost guides break down where the money actually goes.
Do you need permits to build a new house in Studio City?
Yes. Every new home in Studio City requires a building permit from the Los Angeles Department of Building and Safety (LADBS), plus plan check for the structural, electrical, plumbing, and mechanical scopes. New homes must meet the 2025 California Building Standards (Title 24) energy code, which in the Los Angeles climate zone means high-performance insulation, efficient HVAC, and solar readiness on most new homes. A straightforward single-family permit typically costs $1,200–$5,000; complex or large builds run $5,000–$10,000+, and major projects can reach six figures in combined fees. HomeSense manages the entire LADBS process so the permit set — not surprises — drives the schedule.
What makes hillside construction in Studio City different?
Studio City’s canyon and hillside lots often sit in a designated Very High Fire Hazard Severity Zone and on expansive or sloping soils, so they answer to stricter rules. Expect a geotechnical (soils) report, retaining-wall and grading engineering, and deep foundation systems such as caissons and grade beams rather than a simple slab. Chapter 7A fire-hardened assemblies — ignition-resistant siding, ember-resistant vents, and a Zone 0 defensible-space setback — apply to homes in the hazard zone. These details separate a builder who has done Valley hillside work from one who has not, and getting them right up front is what keeps a hillside project on budget.
How long does a new Studio City home take to build?
Plan on roughly 12–20 months end to end for a custom home, and longer for complex hillside sites. Feasibility, design, and permitting commonly take several months before ground is broken; canyon lots add time for geotechnical review, retaining-wall engineering, and foundation work, while a flat-lot rebuild moves faster. HomeSense sequences design and permitting in parallel wherever possible, so the calendar keeps moving while plans sit in plan check.
Why build with HomeSense in Studio City?
HomeSense has been a licensed California general contractor and home builder since 2011, with a 5-star reputation across the San Fernando Valley. The California Contractors State License Board (CSLB) advises homeowners to verify a contractor’s license before any major build — HomeSense’s is #1125001, active and in good standing. One accountable team carries your project from lot analysis and design through framing, systems, and final inspection. We also build home additions in Studio City, and new homes in nearby Woodland Hills and Chatsworth. Explore our new home construction and custom home builder pages, or see where we work on the service areas map. Call (818) 300-3422 for a no-obligation Studio City consultation.
Studio City new-construction FAQ
Does HomeSense build on hillside lots in Studio City? Yes. We build on flat lots and on the sloped canyon parcels above Ventura, coordinating the soils report, retaining-wall engineering, and deep foundations those sites require.
What does it cost per square foot to build in Studio City? Custom homes in Los Angeles generally run $400–$750 per square foot in 2026, with luxury and hillside builds reaching $1,000–$1,800+ once geotechnical and foundation work is added.
Can you do a knockdown-rebuild on my existing Studio City lot? Yes. Teardown-and-rebuild is one of the most common paths in Studio City, where mid-century homes on desirable flat lots are replaced with larger, code-current custom homes.
Do I need a soils report for a Studio City new build? Hillside and canyon lots almost always require a geotechnical (soils) report; many flat lots do as well. We arrange it early so it informs the foundation design rather than delaying the permit.
Are you licensed and insured? Yes — HomeSense holds California License #1125001 and carries full insurance. You can verify our license at the CSLB before you sign anything.
What we actually see building new homes in Studio City
Studio City new construction is a hillside business, and in the hills the approval path is the project. Most buildable parcels south of Ventura Boulevard fall under Los Angeles hillside regulations, which means allowable residential floor area is calculated from lot size and slope rather than a flat percentage, height is measured against natural grade, and grading quantities are capped. On top of that, hillside projects in this part of the city routinely require an approved haul route for exported soil, and that approval goes to a hearing. We have seen haul route review add six to ten weeks on its own, so we schedule it as a parallel track from day one rather than waiting for the building permit to be in hand.
Access is the constraint that quietly sets the construction budget. The streets running up from Ventura toward Mulholland are narrow, often without shoulders, and frequently without a place to turn a concrete truck around. Fire access requirements for a new dwelling include driveway width, grade and turnaround provisions, and on a tight lot those requirements can consume the exact area the client wanted for the garage or the pool. We resolve fire access and construction access on the site plan before design gets attached to a floor plan, because reversing that order is how projects lose a year.
Protected trees and fire zone status both bite here. Mature coast live oaks are common on Studio City hillside lots and the City protected tree ordinance restricts removal and encroachment inside the protected root zone, which shapes where a foundation and its utilities can go. Much of the higher ground also sits in a Very High Fire Hazard Severity Zone, bringing California Building Code Chapter 7A into the exterior assembly: ignition-resistant walls and roofing, ember-resistant venting, restricted decking materials and specific glazing. Neither of these is negotiable, and both are cheaper to design around than to discover.
On the code side, a new low-rise residence in Los Angeles now carries a solar photovoltaic requirement under Title 24 Part 6, and the 2025 code cycle in effect since January 1, 2026 sets heat-pump space and water heating as the practical baseline efficiency path. CALGreen adds construction waste diversion and EV-ready provisions. What that means in Studio City specifically is that the LADWP service coordination for a new, all-electric house on a long hillside run becomes one of the longest lead items on the schedule, and we start it early rather than treating it as a finish-stage utility hookup.
Sources & official references
- Los Angeles Department of Building and Safety (LADBS) — building permits, plan check, and hillside grading.
- California Contractors State License Board (CSLB) — verify contractor License #1125001.
- California Energy Commission — 2025 Title 24 building energy efficiency standards.
- Los Angeles City Planning — zoning, hillside ordinance, and fire-hazard-zone requirements.